An iron rod fence is not as imposing as a spiked wrought iron one.
An iron rod fence is a beautiful addition to any yard. Less imposing than a wrought iron fence with sharp posts, this waist-high fence has a curved top instead. As with any wrought iron fence, the goal is not privacy but rather a frame for your house. An iron rod fence will allow your landscaping and house to shine through it, creating a balanced and symmetrical picture. Does this Spark an idea?
Instructions
1. Check with local zoning officials to determine the rules in your area for fences. Call utilities to mark underground cables.
2. Pound stakes in the ground where you want the fence. String a line as a guide for setting the posts.
3. Dig holes for the posts every 8 feet. The depth of the hole needed is the height of the post less the height of the fence.
4. Lay out the gate, hinges and latching hardware and dig holes for posts on either side to attach the gate.
5. Place each post in a hole and mix concrete and pour it around the posts. Check for plumb. Let dry for 24 hours.
6. Using the brackets that come with the 8-foot sections of fence, slide a bracket over the end of each of the two horizontal rails and screw to the post. Hang the remainder of the fence sections.
7. Screw the hinges onto the gate and hang it by screwing the hinge hardware to the adjacent post. Pre-drill the holes on the post before screwing in place. Attach the latching hardware on the opposite side of the gate and the post on the latch side of the gate.
Tags: iron fence, wrought iron, holes posts, latching hardware, side gate, wrought iron fence
