Rollers on beds can be replaced with posts.
If you want to install risers or posts on your bed you will need to first remove the existing rollers from the metal bed frame. The rollers on a metal bed frame are a type of caster, with a pin that is inserted into a socket on the bottom of the frame. Does this Spark an idea?
Instructions
1. Remove the comforter, including any blankets, and take the sheets off the bed.
2. Take the mattress off the box spring and set it up against a wall.
3. Lift the box spring out of the metal bed frame and lay it against a wall. Pull the metal bed frame out from against the wall.
4. Remove the screws that are used to secure the headboard to the frame with the screwdriver. Pull the metal bed frame away from the headboard; set the frame on its side.
5. Strike the back side of the roller with a hammer to force the socket out of the frame.
6. Pry the socket off the roller with a screwdriver and pull off the socket. Place the socket back in the metal frame.
7. Repeat steps 5 and 6 for the roller on the other end of the frame.
8. Turn the metal bed frame over and repeat this process to remove the rollers on the other side of the frame.
Tags: metal frame, against wall, headboard frame, Pull metal, Pull metal frame, roller with
