Wednesday, March 6, 2013

Repair An Outdoor Chair

Most patio furniture is made from either wicker or webbing


Fixing an outdoor, or patio chair, can be fairly easy. The main questions you must answer before starting this task is what material the chair is made of and what weather conditions are going to potentially further damage the chair.


According to a Creative Homeowner article at the move.com website, the bulk of patio furniture is referred to as either wicker or "webbing" furniture. Webbing is the strong, clothlike material often attached in strips to outside furniture. Does this Spark an idea?


Instructions


Wicker Furniture Repair


1. Wicker material can be repaired.


Grab some glue and a pair of needlenose pliers. Add the glue where the wicker has come apart, using the needlenose pliers to hold and direct the pieces of wicker that need repair.


2. Loop the wicker ends around other loops of the wicker for support. The glue itself isn't enough to hold the wicker in place.


3. Tuck the wicker under after you're finished gluing. Cut off the excess ends with scissors.


Webbed Furniture Repair


4. Webbed furniture shows a classic weaving pattern.


Check to see if you have enough replacement webbing on hand to make the repair. If not, buy some at home improvement, hardware or discount department stores.


5. Unfasten the old webbing, if neccesary. Cut strips from the desired material at the same length as the old webbing. Double-fold the ends of the strips of the new webbing to strengthen it. With the scissors, cut a hole in the double-flap triangle. Starting at the back of the chair, loop and fasten the webbing using clips, washer and screws to the chair's frame.


6. If the chair's webbing material is being replaced, stretch a strip of webbing from one end of the chair to another. Fasten the strip with the triangles and start weaving, bringing the strips over and under one another. Check for any slack, as this will make the chair's frame weaker. Use clips to get the strips of material as tight as possible when fastening the webbing.


7. Test your work by opening and closing the chair as well as sitting in it. If the chair isn't satisfactory, make the necessary adjustments. Webbing may need to be tightened and other strips of webbing may need to be loosened. Allow the clips some flexibility within the chair.

Tags: chair frame, either wicker, either wicker webbing, Furniture Repair, needlenose pliers