Orchids grow best in partial sun or shade and can do well in a hanging planter.
Hanging orchid planters is not difficult. If you are hanging the orchid planter from existing metal or wrought iron work, it is even easier. However, the most difficult place to hang orchids is from a concrete or masonry beam. The general process, however, is very similar to sheet rock or plaster walls. By understanding the more difficult process, you can easily adapt it to the unique requirements of your home or office. Does this Spark an idea?
Instructions
1. Drill a hole directly below where you would like to hang your orchid planter. Orchids generally do best in partial sun or partial shade. The proper bit will depend on the ceiling material. Concrete or plaster will require a masonry bit. Plaster or sheet rock will require a standard wood bit. Drill the hole about 1-inch deep.
2. Place a molly in the hole. A molly is a plastic piece that expands as a screw is driven into its center. As the molly expands, it places pressure on the sides of the hole to secure the screw and molly in place. Use a molly the same size as your drill bit. A larger molly may need to be hammered in place, but will provide a stronger support.
3. Press the molly up into the hole. Make sure the molly is flush with the surface of the ceiling. If it isn't, the molly may not properly hold the weight of the planter.
4. Screw a planter hook into the center of the molly. Pull on the molly and hook assembly to make sure that it is secure. If it comes out, use a larger molly to create a tighter fit between the molly and the hole.
5. Hang the orchid planter on the hook. Tug on it several times to make sure the molly is secure.
Tags: orchid planter, best partial, center molly, Drill hole, into center, into center molly
