Friday, May 31, 2013

Restore Rusty Wrought Iron

Restore Rusty Wrought Iron


Wrought iron that is left outdoors is susceptible to rusting. When moisture comes into contact with the iron, rust forms. Whether the rust is on iron railings, furniture or decorative ornaments, removing the rust and restoring wrought iron is important in preserving the beauty and structural reliability of the iron. When rust forms on wrought iron, it slowly eats away at the material, leaving it unstable and weak. Removing rust from wrought iron will not only restore the appearance of the iron, but also increase its life span. Does this Spark an idea?


Instructions


1. Scrub the wrought iron with a dry wire brush. This will remove any loose or flaking rust. Go over the wrought iron with a dry paintbrush to remove any tiny rust flakes or dirt.


2. Sand the wrought iron with sandpaper to further remove rust. Use the sandpaper to also remove any flaking or loose paint. Begin by using a coarse sandpaper to remove deeper rust. Go over the wrought iron with a medium-grit sandpaper.


3. Mix a solution of water and commercial rust remover in a bucket. Refer to the label on the rust remover for specific mixing instructions.


4. Dip a wire brush into the solution. Scrub the remaining rust spots on the wrought iron with the solution, scrubbing in a circular motion. Be sure to remove all of the rust; even a tiny spot left on the wrought iron will spread in the future.


5. Brush of the rust residue with the paintbrush. Go over the wrought iron with a fine steel wool pad, again working in circular motions, to restore the iron's appearance.


6. Dampen a sponge with plain water. Wipe down the wrought iron to remove any further residue.


7. Allow the surface to dry. Apply a coat of rust-resistant primer to the wrought iron. Allow the primer to dry completely


8. Apply two coats of rust resistant paint. Use a medium-bristled paint brush to apply the paint in smooth, even strokes. Let the paint fully dry in between coats. If you do not want to repaint the entire wrought iron structure, just touch it up with matching paint.







Tags: wrought iron, iron with, wrought iron with, wrought iron, over wrought, over wrought iron