Tuesday, February 22, 2011

Repair The Paint On Wrought Iron Furniture

There's simply no quick fix when it comes to repairing the paint on wrought iron furniture.

When the correct type of paint is applied to wrought iron furniture, the finish should never peel or chip. If you noticed problems in the finish of your wrought iron furniture, it was likely initially primed or painted with the wrong materials, or the application process was not carried out correctly. If you need to repair the paint on wrought iron furniture, you'll have to do more than just touch it up with fresh paint, or you will see a repeat of the problem relatively soon. Does this Spark an idea?


1. Lay the wrought iron furniture on top of a heavy-duty fabric drop-cloth.

2. Remove any loose or peeling paint by scraping it with a wire brush. Do not just concentrate on the obvious areas. Run the wire brush across areas that look smooth to see if additional paint peels up.

3. Smooth any rough areas of paint using 80- to 120-grit sandpaper.

4. Apply blue painter's tape to any areas you do not want painted.

5. Spray etching primer onto the wrought iron furniture. Apply only a thin coat to prevent runs or drips. Allow the etching primer to dry and cure for four hours.

6. Apply an oil-based paint using a 2-inch oil-based paintbrush. Apply only a thin coat. Allow the surface to dry for two hours, and then apply at least one more coat.

Tags: wrought iron furniture, iron furniture, wrought iron, Apply only, Apply only thin, etching primer